show high-availability

This command displays network monitor status and HA status.

Syntax

show high-availability {network-monitor-status|status}

Command	Description
network-monitor-status	Displays HA Network Monitor status.
status	Displays HA status.

Related Commands

■

debug ha

■

high-availability

Command Mode

Basic and Privileged User

Example

■

To display HA status:

# show high-availability status
HA Status:
Unit HA state is: Active
HA Connection with other unit State is: Connected
Last HA sync. action/state with other unit was: Sync. ended !

■

To display HA Network Monitor status:

# show high-availability network-monitor-status
HA Network monitor is enabled
Number of unreachable table entries: 0
Entries status:
Table row 0: Reachability status is: Reachable, Destination peers status:
             Peer address 10.4.4.69: Reachability status is: Reachable, ping loss percentage: 0%
Table row 1: Reachability status is: Reachable, Destination peers status:
             Peer address 10.5.5.5: Reachability status is: Reachable, ping loss percentage: 0%
             Peer address 10.5.5.6: Reachability status is: Reachable, ping loss percentage: 0%
Note - ping loss percentage refer to the last 5 minutes